Early Buick Bore Spacing

once Jyrki made his request, it occurred to me that there didn't seem to be a good repository or source for the old Buick engines. i mean, you can go to Carnut to get the raw bore x stroke dimensions, but there's a lot of other interesting info that they don't include.

so, i figured i'd start a thread where anybody who has any of these specs for the old engines can post them.

i've got the 320 pitch and some info for a Duesenberg. i'd love it if anybody would post the info for some of these other engines.

Buick 320, produced 1936-52
Deck
Compression
#
Pitch
1
4.075"
2
4.290"
3
4.075"
4
4.545"
5
4.075"
6
4.290"
7
4.075"
8


here's a list of the 1904-1929 engines:
http://www.carnut.com/specs/gen/buick20.html

the 1930 engines are here:
http://www.carnut.com/specs/gen/buick30.html

and here's what i've got for the Duesenberg SOHC 183ci
Deck
Compression
#
Pitch
1
3.230"
2
3.485"
3
3.230"
4
6.405"
5
3.230"
6
3.485"
7
3.230"
8
 

pmuller9

New member
263 Block hole locations

I've attached the 263 hole locations reference off the corner defined by the 3 locating bosses on the side of block and the front of the block.
Handy if anyone wants to make a torque plate.

Paul
 

Attachments

Top