Your user name says 425Buick. I know a 320 is a straight 8, but there is also a 322 Nail Head. Is this for a "nail" or str.8???
Brendsten's makes adapters/bells for both. Do a search on trans. adapters & it should be the 1st. to pop-up.
Tom T.
Does anyone remember an old thread about adapting a T-5 transmission to a 320 stick bellhousing? I need ideas. Thanks.
Your user name says 425Buick. I know a 320 is a straight 8, but there is also a 322 Nail Head. Is this for a "nail" or str.8???
Brendsten's makes adapters/bells for both. Do a search on trans. adapters & it should be the 1st. to pop-up.
Tom T.
Tom Telesco
Classic and Muscle Automotive
12 Cook St.
Norwalk, CT 06853-1601
Day Phone 203-324-6045 ET
NailHead Mini-Starters '53-'66
Adjustable Roller Tip Rocker Arms - All NailHeads
Custom forged pistons
Front & rear neoprene seals
Many other "Nail" parts
"If I can't get it, you don't need it!"
Hi Tom, This is the same Tom that you have talked to about cam degreeing. Thanks again for that info. This time I am talking about a straight 8. I know Bob Bendsten; good guy, good products, just don't want to give him a grand to adapt to a Chevy bellhousing. I think I have it figured out now based on some previous posts I have found using the stock Buick bellhousing. Thanks for answering.
Small world sometimes, isn't it???
Tom T.
Tom Telesco
Classic and Muscle Automotive
12 Cook St.
Norwalk, CT 06853-1601
Day Phone 203-324-6045 ET
NailHead Mini-Starters '53-'66
Adjustable Roller Tip Rocker Arms - All NailHeads
Custom forged pistons
Front & rear neoprene seals
Many other "Nail" parts
"If I can't get it, you don't need it!"
Tom,
I purchased an adapter years ago for my 263, I can't remember the gentleman's name, I believe he was from California. If I remember correctly he made adapters for the 320 also. I will try and dig up the paperwork for his contact information and get back with you.
Pat
Tom,
I purchased the adapter from Bruce Wyman, I believe his email is RBW@foothill.net
PM me if you would like the phone number, I don't want to publish the phone number without permission.
Thanks,
Pat
I am sure Bendtsen's could do it.
You can find them through the Links listed here:
http://www.teambuick.com/links/trans...drivelines-28/
WEBNOTE: When inserting an email in a posting, use the "smilie" @ so that web robots don't pick up your address and send you more junk mail!
Members can be contacted by clicking on their "handle", but you are much better off to post to the thread!
Bookmarks