Thickness should noy be a problem except in regards to compression ratio. The only difference is the bore size, and as long as the seal around the bore is OK, you should be all set.
I'm restoring a Nailhead 322cid but have a gasket set to a 364 and 401 engine
Can I use the head gasket on the 322 ?
It looks OK but I don't know about the thickness ?
Thickness should noy be a problem except in regards to compression ratio. The only difference is the bore size, and as long as the seal around the bore is OK, you should be all set.
Joe T
37Buick coupe /455 powered
40 Super convert
72 GS455 convert 13.0/105
69 Buick Sportwagon
92 Road,aster wagon
04 Rendezvous
Thank you ! it looks OK !
Members who have read this thread: 0
Posting Permissions
Bookmarks