Just go to your local hardware store, take the new pump with you, & get a 1/2" NPT (I believe that's the size) plug in the plumbing dept. If your unsure ask for help. Put some thread sealer on the plug to help seal the threads or the tape made for this kind of stuff. Again, ask for help if unsure. MANY bolts that hold the pump on go into blind holes. To check which ones are open to coolant use a thin screwdriver & poke at the holes. Ones that go through use some sealer like Permatex or equivalent..
Tom T.
Tom Telesco
Classic and Muscle Automotive
12 Cook St.
Norwalk, CT 06853-1601
Day Phone 203-324-6045 ET
NailHead Mini-Starters '53-'66
Adjustable Roller Tip Rocker Arms - All NailHeads
Custom forged pistons
Front & rear neoprene seals
Many other "Nail" parts
"If I can't get it, you don't need it!"
Bookmarks