Not sure if this is loading properly, have a look at image 11-37:
http://www.teambuick.com/reference/l...files/11-b.php
Member
Hello! I have a 1960 Buick Electra 225 that I bought recently. I have found out that two of the manifold vacuum hoses on that 401 Nailhead engine are not connected to anything. They both go of the triple fitting on the intake manifold just in front of the carburetor. Where should they go? There is a vacuum switch on the top of the fuel filter that is not connected to anything so maybe one vacuum hose should go there? But what about the second one? I also found that on the firewall on the passenger side there is a switch connected to vacuum diaphragm, but the switch has no vacuum source. Should it be connected to that second manifold vacuum?
vacuum2.jpgvacuum1.jpg
Not sure if this is loading properly, have a look at image 11-37:
http://www.teambuick.com/reference/l...files/11-b.php
WEBNOTE: When inserting an email in a posting, use the "smilie" @ so that web robots don't pick up your address and send you more junk mail!
Members can be contacted by clicking on their "handle", but you are much better off to post to the thread!
Member
Thank you so much! That manual is very helpfull!
Posting Permissions
Bookmarks