any 6 bladed fan from any GM product will bolt up to your water pump hub , they were all the same pattern. i'd start off with a bone yard search.
Has anyone got a line on a 6 blade fan to fit my 401 nailhead on my '60 Lesabre? I've heard a 6 blader from a '59 Caddy would bolt up. My mechanic doesn't like the newer aluminum 6 blade flex jobs and I've heard some bad things about them too so I would rather go old 6 blade as opposed to a new one. Thanks in advance.
Oz
any 6 bladed fan from any GM product will bolt up to your water pump hub , they were all the same pattern. i'd start off with a bone yard search.
Thanks Wolfspupsdad. I can probably dig one up on Ebay then. It was the bolt pattern thing I was most concerned about, thanks for answering that question for me! After I take care of the fan issue the next item to tackle will be finding a shroud which i suspect will be a tougher puzzle to figure out.
measure your radiator , while out in the bone yards look at caddy , olds and buicks for the fan shroud. GM didn't use one shroud for just buicks , alot of that sort of stuff was interchangiable. good luck on your search
I have found that fans from the 60s and 70s Ford V8 will work. I have been using one on my '55 Buick (18" d).
Airy Cat
1954 41D
1955 46R
1956 63D
1998 Jeep Wrangler
2007 Corvette Coupe
Bookmarks