Several vendors sell the parts for mounting the TV cable at the carb end. You could start with this page from Bowtie Overdrives.
http://www.tvmadeez.com/
Ray
Junior Member
Hi, guys!
I was hoping to get some insights on hooking up the TV cable from a 200-4r onto the AFB on my 340. It looks like some kind of linkage modification is going to be necessary. I am sure somebody out there has done it already. If someone would send a photo or two that would be awesome!
Greg
Senior Member
Several vendors sell the parts for mounting the TV cable at the carb end. You could start with this page from Bowtie Overdrives.
http://www.tvmadeez.com/
Ray
Last edited by raycow; 07-12-2012 at 01:13 AM.
Send me a pm with your e mail i will send photos. I have problems attaching things to messages it just will not work for me. Pheonix transmissions suplied me with 3 arms to fit my carb I picked the one that fit best and returned the rest. I used a carb bracket from summit to mount the transmission cable, it had to be modifed to fit the AFB and the manifold I also needed to raise the carb for clearence fo the new tv cable.
I went to bowtie overdrive for the wireing kit, they made it simple.
Bob
Posting Permissions
Bookmarks