Looking for Rebuilt Buick 300

[1965screwlark]

Does anyone have a buick 300 they want to get rid of in the So Cal area?
Preferably rebuilt with the aluminum heads or whatever let me know.
I can't afford much.

[WildKitty]

Hate to inform you, there's no such thing as a CHEAP 300. Heads alone are $300 EA....... I just had valve job done on mine = $100 for valves, $200 labor.

Good luck

What's wrong with your 300?

64 Wildcat 445
64 LeSabre 310
Butch

[soberarmy]

i have a 300 block and aluminum heads. the heads needs to be rebuilt but the block is still good. it ran good before i had to pull it. ive since replaced it with a 401. the 300 was out of a 64' lesabre. im in san diego if interested.

[JSR]

Does anyone have a buick 300 they want to get rid of in the So Cal area?
Preferably rebuilt with the aluminum heads or whatever let me know.
I can't afford much.

Have "COMPLETE" 300 w/alm. heads and intake. All in pieces, ready for cleaning, inspection, etc. It's here in Loveland Colorado. You can have the whole thing for 400.00, unless ya got something else to trade.

[conroyboy]

Do you still have the aluminum heads and intake for the buick 300 v-8?

[sabrerattler7]

Depends on your time frame. I have a 300 in a 65 Le Sabre, was told it didn't run when I acquired the car. My plan was to remove and add 430.
Car is now in AZ and I'm pretty busy. It would be core priced. I travel between AZ and San Diego Co. frequently.

[sd-slider]

I'm in San Diego and I have a set of aluminum heads and a 2bbl intake from a 64' 300 that had about ~60K miles on them.