Very common problem on the 350/400/430/455 engines with the oil filter on the timing case cover. As said DO NOT use Fram filters. You have an oil drain back problem/loss & the engine has to build oil pressure upon initial start-up. One way to gain some longevity is DO NOT try & start the engine immediately. Don't set the choke by pumping the gas pedal. Let it crank until the oil light goes out & while still cranking then pump the pedal. Doing this will only help the longevity issue. The problem is already there & MUST be repaired. Bearings have TOO much clearance & are more than likely already worn to copper.
Just my thoughts on the subject.
Tom T.
Tom Telesco
Classic and Muscle Automotive
12 Cook St.
Norwalk, CT 06853-1601
Day Phone 203-324-6045 ET
NailHead Mini-Starters '53-'66
Adjustable Roller Tip Rocker Arms - All NailHeads
Custom forged pistons
Front & rear neoprene seals
Many other "Nail" parts
"If I can't get it, you don't need it!"
Bookmarks