Bill of Sale

I am looking for a wiper arm

DCL70

Member
Charles,
I have a new pair Trico #AL-250 adjustable 14"-19" wiper arms in Trico boxes that are replacement arms for many models. The bayonet end is also adjustable. I also have a new pair of ANCO # 41-03 adjustable 14"-19" wiper arms.
If interested, $20 for either pair plus shipping from 03054 and Paypal fee (if applicable). I can provide photos.
BTW, how long is your original blade on your 1966 Buick Wildcat? Measure from the center of the rivet head to the tip of the bayonet. I have some used wiper arms from Chevrolets that might be the same.
Dave
 
Charles - I can greatly sympathize with parts that do not fit Buicks. Just bought a fuel sender on Ebay that was listed by an experienced seller for 1961 Buick, it arrived, and certainly comes no-where close to fitting my 61 Electra 225 project. Must be for a Chev (as usual)

I have a 66 Cat in my Buick junkyard; it is a 2dr hdtp. I am assuming same arms on your sedan. If you are up in New Brunswick some time when the border opens up drop in and see me.

Dave
 
Charles - I can greatly sympathize with parts that do not fit Buicks. Just bought a fuel sender on Ebay that was listed by an experienced seller for 1961 Buick, it arrived, and certainly comes no-where close to fitting my 61 Electra 225 project. Must be for a Chev (as usual)

I have a 66 Cat in my Buick junkyard; it is a 2dr hdtp. I am assuming same arms on your sedan. If you are up in New Brunswick some time when the border opens up drop in and see me.

Dave
Hi Dave, I may work on a project in Quebec in the coming months. If so, I’ll gladly extend my trip to pay you a visit. Thank!
 
Ho
Charles,
I have a new pair Trico #AL-250 adjustable 14"-19" wiper arms in Trico boxes that are replacement arms for many models. The bayonet end is also adjustable. I also have a new pair of ANCO # 41-03 adjustable 14"-19" wiper arms.
If interested, $20 for either pair plus shipping from 03054 and Paypal fee (if applicable). I can provide photos.
BTW, how long is your original blade on your 1966 Buick Wildcat? Measure from the center of the rivet head to the tip of the bayonet. I have some used wiper arms from Chevrolets that might be the same.
Dave
Hi Dave, my single arm is about 17 1/2” long. I believe it is from a Buick Riviera of the same era. I would not be surprised if GM models had interchangeable consumables and small parts. Please do send me a photo

New ANCO/Trico are cheaply made a d use ugly plastic part (articulation of small end). That would be my option of last resort.

Thank you++
 

DCL70

Member
Charles,
Most of the parts that I have collected over the past 40 years are for 63-67 Corvette as well as Chevrolet, Chevelle, and Camaro models in the 1960's and 1970's so Buick parts are not my expertise by any means.
A 17 1/2" wiper arm (measured from the center of the rivet head to the end) is a very long wiper arm.
The longest Trico wiper arm that I have measures 14 5/8" (rivet to end) and marked "L2" from a 1965 Chevrolet w/2 spd. motor (LH), GM # 3862389 as per my 1965 Chevrolet parts catalog (May 1965) in Gr. 10.147. It also has a shiny finish. The 1966 & newer arms have a dull satin finish.
I will post photos sometime later today of my adjustable Trico and ANCO wiper arms which are not original equipment but will work.
Dave
 
Charles,
Most of the parts that I have collected over the past 40 years are for 63-67 Corvette as well as Chevrolet, Chevelle, and Camaro models in the 1960's and 1970's so Buick parts are not my expertise by any means.
A 17 1/2" wiper arm (measured from the center of the rivet head to the end) is a very long wiper arm.
The longest Trico wiper arm that I have measures 14 5/8" (rivet to end) and marked "L2" from a 1965 Chevrolet w/2 spd. motor (LH), GM # 3862389 as per my 1965 Chevrolet parts catalog (May 1965) in Gr. 10.147. It also has a shiny finish. The 1966 & newer arms have a dull satin finish.
I will post photos sometime later today of my adjustable Trico and ANCO wiper arms which are not original equipment but will work.
Dave
Photos would be great. Thank you for the additional info!
 

DCL70

Member
Charles,
I was wrong about the Trico adjustable wiper arms as they only extend to about 14 5/8". They are in Trico boxes before Zip Codes existed as the address is Buffalo 3, N.Y. Attached is a photo below. I will post the ANCO arms which extend to 17 3/8" shortly as I don't know how many photos I can add to this post.
Dave

wAYOiLl.jpg
 

DCL70

Member
ANCO # 41-03 adjustable Wiper Arms. They extend to 17 3/8". The box is marked 14"-19"????
The bayonet is also adjustable.

AQ76lz2.jpg
 
The ANCO wiper arm without the box is nice but appears to be slightly used.
I bought original wiper arms on eBay from another model — they fit perfectly. Most GM models from 1965-1967 used the same consumables. It’s a pity there isn’t a spare parts swap database.
 
Top