look at your local autoparts store (like napa) there is a special tool for removing the side pins.
Yesterday I was taking my steering collum apart to tighten the four tourx bolts that had worked loose over the years and when I got to removing the pivot pins on the tilt mech. I found that one of the pins had what looked like part of a bolt broken off in it. My question is there a way to get the pin out without damanging any more of the tilt mech? Thanks Again for any help.
look at your local autoparts store (like napa) there is a special tool for removing the side pins.
I have the tool that you use for the side pins, but like I said there is a bolt or somthing broke off in the hole of the side pin so I can't use it.
Bookmarks