Hello Loren.
The windlace that is on either side of the center door post was actually sewn to a thin piece of cardboard that hooked onto a couple of tabs in the metal to hold it in place. This went under the upholstered panel on the door post. The front windlace had a piece of piping sewn into it that slid into a metal channel. This channel is part of the piece that holds the rear edge of the kick panels. The rear windlace stapled to a tack strip behind the rear side panel.
I am not clear on the padding you are referring to. If it is on the side of the floor pan by the door openings, it could be either the sound deadener or the carpet padding. If you can be a bit more descriptive concerning this part, I can probably be more help in this area.
Let me know if you have other questions. Best of luck with your restoration.
Best Regards,
Ron
[This message has been edited by rcfryer (edited 01-24-2002).]
[This message has been edited by rcfryer (edited 01-24-2002).]
[This message has been edited by rcfryer (edited 01-24-2002).]
Bookmarks