Hello! I have found my way here in search of some wiring/switch help. I'm about to dig in to the forums and see what I can find. Just thought I would stop by and ask for any guidance on the introduction forum. I have a 1969 Skylark convertible. The factory wiring is intact and working from the plug in below the dash, up to the switch. But the switch is just a generic toggle switch 'roughly' wired to the factory wiring and dangling from the dash. I want to replace the wiring harness from the plug in point under the dash up to the switch with a factory switch if possible. I have had no luck with google searches. Thanks for any help!