Hi,
I am building an 'old-school' '51 Stude custom pickup I plan to drive regularly.
I have a 322 out of a '56 Century... factory 4 bbl. & factory dual exhaust. This motor originally had a dynaflow behind it but I want to run a stick. I have an old Cragar bellhousing to mate a Borg-Warner T85 3-speed trans to a 53 - 56 nailhead.
What I need is a '56 322 stick flywheel... I am pretty sure it is a one-year-only item due to the external balancing of these motors.
Please get back to me if you have any leads on a stick flywheel for a '56 322!!!
Thanks in advance,
Rindy
nccc02@reagan.com
Russ Martin shows one here: http://centervilleautorepair.com/flywheel
'56 flywheel is one year only and should be part number 1170247
It will cost some money, but a balancer can take an internal design flywheel and balance it to external, or for that matter vise versa...
I don't know, but I would not be surprised if the '56 crankshaft will have to be modified to accept an input shaft bushing for the transmission.
Throw out Bearing Adaptor Bushing
Motion industries EP2228-32 Sintered Bronze Bearing
Just had a look on ebay and saw this aftermarket 322 flywheel. The interesting thing is that it appears to have a bunch of balance holes like you would expect for an externally balanced engine which fits your description!
1971 Buick 322 flywheel
WEBNOTE: When inserting an email in a posting, use the "smilie" @ so that web robots don't pick up your address and send you more junk mail!
Members can be contacted by clicking on their "handle", but you are much better off to post to the thread!
Bookmarks