From the Reference Section:
- How to wire the Switch Pitch on a Buick Transmission
- 1950 Wiring Diagrams
- 1951 Wiring Diagrams
- 1952 Wiring Diagrams
- 1955 Wiring Diagrams
- 1957 Wiring Diagrams
- 1964 Wiring Diagrams
- 1966 Wiring Diagrams
- 1967 Wiring Diagrams
- 1968 Wiring Diagrams
- 1972 Wiring Diagrams
- 1975 Wiring Diagrams
Results 1 to 8 of 8

Thread: Tail Lights, 1969 LeSabre

  1. #1
    Join Date
    Aug 2017
    Location
    Hereford,
    Posts
    9
    Rep Power
    0

    Tail Lights, 1969 LeSabre

    This may be the dumb question of the day but I’ll ask. I can’t see a simple way to get to the tail light to remove and replace the burned out bulbs in my LeSabre’s rear bumper. I can barely get my hand into the area let alone try and remove a connection. I don’t see an obvious access panel through the trunk either. It appears as though I have to drop the bumper to replace lights. Any thoughts?

  2. #2
    Looking at the pictures, I would have thought it would have been through the trunk...


    WEBNOTE: When inserting an email in a posting, use the "smilie" @ so that web robots don't pick up your address and send you more junk mail!
    Members can be contacted by clicking on their "handle", but you are much better off to post to the thread!

  3. #3
    1965-70 are all the same base design for the Le Sabre, so the 1967 Chassis Manual should be helpful.

    https://www.teambuick.com/reference/...ssis/index.php

    https://www.teambuick.com/reference/...iles/120-b.php
    The way to crush the bourgeoisie is to grind them between the millstones of taxation and inflation.
    Vladimir Lenin

    Government schooling is about "the perfect organization of the hive."
    H.H. Goddard, Human Efficiency (1920)

  4. #4
    Join Date
    Sep 1999
    Location
    Dbl Oak,TX
    Posts
    745
    Rep Power
    25
    Timmy,
    The question is a good one, which the '69 shop manual does not appear to help answer correctly. It lumps all car series together and says the sockets can be snapped out from inside the trunk compartment.

    Attached are the '69 pages showing instructions and the rear bumper wiring harness.
    Attached Images Attached Images
    Last edited by TODD; 06-26-2018 at 07:52 AM.
    What has been, can be again. (Bob Wills, 1942)

  5. #5
    Join Date
    Sep 1999
    Location
    Dbl Oak,TX
    Posts
    745
    Rep Power
    25
    The 1970 model is most like the '69 for LeSabres. The '70 shop manual is more helpful as well. It indicates rear lamp sockets can be removed from beneath the bumper on LeSabre and Wildcat.

    If room is inadequate to twist the sockets out from below, there is a procedure given to replace the tail light lens assembly by removing some bolts and rocking the bumper down without removing it from the car. There is a wiring harness plug on the left end that disconnects the bumper harness from the body if needed. This looks like a 2- or 3-man job.

    Attached are the pages from the '70 shop manual. Hope this helps.
    Attached Images Attached Images
    What has been, can be again. (Bob Wills, 1942)

  6. #6
    Join Date
    Aug 2017
    Location
    Hereford,
    Posts
    9
    Rep Power
    0

    Smile Thank you!

    Awesome! Thank you all for the info. I’ll do a stare and compare this evening after work and let you know. The diagrams sure do look like the light sockets should just pop out but when staring in to the area from below, it just doesn’t look so. Breaking anything is obviously something hung I want to avoid. Again, thank you and I’ll let ya know how it goes.

    Tim

  7. #7
    Thin/skinny hands/arms help tremendously in this instance.
    Tom Telesco
    Classic and Muscle Automotive
    12 Cook St.
    Norwalk, CT 06853-1601
    Day Phone 203-324-6045 ET
    NailHead Mini-Starters '53-'66
    Adjustable Roller Tip Rocker Arms - All NailHeads
    Custom forged pistons
    Front & rear neoprene seals
    Many other "Nail" parts
    "If I can't get it, you don't need it!"

  8. #8
    Join Date
    Aug 2017
    Location
    Hereford,
    Posts
    9
    Rep Power
    0
    I ended up pulling the bumper, cleaning everything, checking all of the wiring and replaced all of the bulbs. The ground was bad which was why the brake lights were not working in the first place. My arms were not skinny enough to do the work with the bumper on. Having the license plate and plate carrier removed did help later when one of the replacement bulbs quit. Thanks again to those who threw out ideas!

    Tim

Similar Threads

  1. 1965 buick skylark no headlights or tail lights
    By impala in forum Electrical and Gauges
    Replies: 0
    Last Post: 09-11-2014, 02:24 PM
  2. What year are these tail lights off of
    By Renee in forum Electrical and Gauges
    Replies: 4
    Last Post: 07-31-2012, 05:43 PM
  3. Tail Lights Fail When Headlights are On
    By Stray Buick in forum Electrical and Gauges
    Replies: 3
    Last Post: 05-16-2012, 05:15 PM
  4. tail lights for a super same as a wagon
    By lb_hothead in forum Electrical and Gauges
    Replies: 0
    Last Post: 08-20-2005, 02:49 PM
  5. 1957 rear tail lights
    By lb_hothead in forum Electrical and Gauges
    Replies: 2
    Last Post: 08-19-2005, 06:54 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
TeamBuick.com Privacy Policy