Hi!
I'm looking for someone who has built a 2.5 inch exhaust system.
Build pics and parts you have used are estimated.
Best regards
Jimmy
Sorry, no build pics or anything, but I have done a '67 GS400 and a '66 Riviera GS. both with Flowmaster 2.5" mandrel bend kits. Worked out great. You will need a mig welder, and I used exhaust band clamps, and a set of vise grips modified with a couple of pieces of 1-1/2" angle iron about 5-6" long to line up and hold the pieces for tacking.
The Riviera may loose its system because I want it quiet. The GS400 could face the same fate. The GS400 will keep its electric cutouts for when I want to be heard Everyone but me loves Flowmasters, they were built with the American Thunder 17119 kits.
Last edited by Bob; 12-04-2017 at 04:24 PM.
WEBNOTE: When inserting an email in a posting, use the "smilie" @ so that web robots don't pick up your address and send you more junk mail!
Members can be contacted by clicking on their "handle", but you are much better off to post to the thread!
Bookmarks