67 GS radiator, mounts and shroud will adapt to any 64-67 skylark with a 455.
What do I use for cooling as far as shroud radiator and fan thanks
67 GS radiator, mounts and shroud will adapt to any 64-67 skylark with a 455.
Steve B.
67 GS 525 Buick Stage IV
66 GS Convertible
65 GS HT
63 Riv
02 Subaru WRX Turbo
03 Ford Cobra Convertible (Factory Supercharged)
Cool who sells what I need as far as shroud and brackets
I'm sorry I meant mounts for the radiator not brackets do they have to be out of a 67 gs or will universal ones work
The parts place, OPGI and Year one all carry a reproduction shroud. Griffen has an aluminum radiator replacement for the 67 and there are other universal models that are cheaper, but would require an external transmission cooler if you have an automatic. Brackets fit the wider GS radiator. So, you would need to find used or fabricate the bottom and top brackets.
Steve B.
67 GS 525 Buick Stage IV
66 GS Convertible
65 GS HT
63 Riv
02 Subaru WRX Turbo
03 Ford Cobra Convertible (Factory Supercharged)
Griffin offers some bolt in options which would work well:
http://www.griffinrad.com/inc_result...&model=Skylark
Then you may even be able to adapt your current shroud or depending on the look you want, use electric fans.
WEBNOTE: When inserting an email in a posting, use the "smilie" @ so that web robots don't pick up your address and send you more junk mail!
Members can be contacted by clicking on their "handle", but you are much better off to post to the thread!
used the original rad support and shround on my swap with a 15 in flex fan.but my car had a 340 .look around for a parts car
Thanks rob67 I'll look for one I know they are getting real hard to find thanks
To bad I'm in northern bc I have a complete front clip for a 67
Where is that I'm near Springfield mass
Bookmarks