Originally Posted by
95ParkAve
Okay so that bizarre battery wasting relearn thing worked again. Security light is going off after the dinging stops every time.
Tested as you described and I'm getting no power at fuse 1A. Also, another site recommended looking at the headlights while trying to start to indicate the cause. The headlights didn't dim or change in any way while turning the key to start.
Test for voltage on fuse 1A again on each pin to ground while ignition switch is in START. Do you get 12V?
Test for voltage on fuse 1B on each pin to ground while ignition switch is in RUN. Do you get 12V?
Put ignition switch in RUN. Use a jumper wire from fuse 1A either pin to fuse 1B either pin. See if it starts. Pull jumper off if it starts running.
What has been, can be again. (Bob Wills, 1942)
Bookmarks