I installed new rear springs that were a little stiffer than the old ones and installed new heavy duty shocks. This worked real good.
The rear of my 4 dr buick special that i am restoring seems a little saggy and was wondering what would be the best way to address this. source new springs , have mine fixed , or add coil spring spacers ? i plan on fixing this issue when i drop the rear end to stick in a new clutch (if i can find one), any help with this or the source for the parts (springs and clutch) would really be appreciated. thanks guys
I installed new rear springs that were a little stiffer than the old ones and installed new heavy duty shocks. This worked real good.
Airy Cat
1954 41D
1955 46R
1956 63D
1998 Jeep Wrangler
2007 Corvette Coupe
I have an extra set of rear springs for a 56 Buick I bought from jamco two years ago. they are meant to put the car at factory height but have a slightly heavier duty spring rate. I converted to independent rear suspension so now theyre just collecting dust. if you're interested I can send pictures
Bookmarks