From the Reference Section:
- Musclecar Enthusiast March 06 - the Jim Burek 350 porting article
- Ancient mid 12's secrets for your Buick *350*
- Poston Camshafts, Buick 350
    - 350 casting Numbers
- Buick 350 Drag Strip Tests from Kenne-Bell
- 350 Engine Specifications
Results 1 to 6 of 6

Thread: Why the Spark Plug and Timing Adv. Change from '68 to '69?

  1. #1
    Join Date
    Feb 2017
    Location
    Waterford,
    Posts
    6
    Rep Power
    0

    Why the Spark Plug and Timing Adv. Change from '68 to '69?

    Does anyone know why the 350 c.i. specs show a change in spark plug type from 44TS to R45TS and a timing advance from 2.5 deg BTD to 0 deg TDC from 1968 to 1969 model year?

  2. #2
    Join Date
    Sep 1999
    Location
    Dbl Oak,TX
    Posts
    745
    Rep Power
    25
    The R in the spark plug number indicates resistor type which was introduced all across the GM line in 69. The 45 is one step hotter plug than a 44.

    Timing was was changed to 0 deg TDC in order to comply with federal emission standards for operation at idle.
    What has been, can be again. (Bob Wills, 1942)

  3. #3
    Join Date
    Feb 2017
    Location
    Waterford,
    Posts
    6
    Rep Power
    0
    Great info. Thanks! Unfortuneately, I just found out I don't have the original engine. I'm pretty sure its newer than a 68-69.

  4. #4
    68-69 engines oil the rockers by weeping through the shafts.

    newer Buick 350s use the 'normal Chevy' method of pumping oil up to the rockers through the pushrods.

    if you can find the two digit Engine Code, that will tell you the year and spec of the original application.

    https://www.teambuick.com/reference/...gine_where.php
    The way to crush the bourgeoisie is to grind them between the millstones of taxation and inflation.
    Vladimir Lenin

    Government schooling is about "the perfect organization of the hive."
    H.H. Goddard, Human Efficiency (1920)

  5. #5
    Join Date
    Aug 2015
    Location
    Oakland Ga
    Posts
    133
    Rep Power
    0
    Quote Originally Posted by grantclev View Post
    Great info. Thanks! Unfortuneately, I just found out I don't have the original engine. I'm pretty sure its newer than a 68-69.
    None of the stock specs apply then, ESPECIALLY ignition timing. Lots of confusion out there about ignition timing. Most Buick distributors are set up so that at WOT, total advance is 30-34*. The 69 distributor had 30-34* of mechanical advance. That is why it is initially timed at 0* (TDC). Being that you are dealing with an engine and car that is 40 + years old, it is likely the distributor has been changed at some point. That means you should set the total advance.
    Larry

    1970 GS455 Stage1 Race weight 4025 lbs.
    TSP 470, 602 HP, 589 TQ
    MT headers, Gear Vendors Overdrive
    Best E.T. 11.54 Best MPH, 116.06
    1998 Riviera SC3800

  6. #6
    Join Date
    Sep 1999
    Location
    Dbl Oak,TX
    Posts
    745
    Rep Power
    25
    Looks like our Tuneup Specs need correction. Those 68 350 numbers are carried over from a 67 430. Shop manual gives a 45TS plug and 0 deg TDC timing for the 68 350. Also in there is a description of the Controlled Combustion System. A blurb describes how emissions are reduced by retarding the idle advance to TDC.

    If you could post the part number of the distributor we could tell more about what we're working with.
    What has been, can be again. (Bob Wills, 1942)

Similar Threads

  1. Spark plug Gap?
    By rsvp4sean in forum Straight Eights!
    Replies: 4
    Last Post: 08-12-2014, 08:38 PM
  2. spark plug cover
    By englishbuick in forum Straight Eights!
    Replies: 2
    Last Post: 02-14-2011, 12:21 PM
  3. 455 Spark Plug Gap
    By Ashauer in forum Big Block: 400, 430, 455
    Replies: 5
    Last Post: 08-07-2006, 08:18 PM
  4. spark plug covers
    By jsf515 in forum Nailhead: 264, 322, 364, 401, 425
    Replies: 1
    Last Post: 11-29-2004, 04:10 PM
  5. spark plug covers
    By potopaj in forum Nailhead: 264, 322, 364, 401, 425
    Replies: 2
    Last Post: 12-27-2001, 03:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
TeamBuick.com Privacy Policy