1967 LeSabre Coupe- Engine Wiring Harness/ Underdash & Body Harness

**Tommie** · 12-23-2015, 07:47 AM

Hello All.
Does anyone have as source for a engine harness for 67 LeSabre? Car is being restored with the stock 340 -4 drivetrain. Looks like a universal Painless 21 circuit the will work for the fuse/dash side. Any help would be appreciated.

Thanks,
Tommie

**bob k. mando** · 12-24-2015, 10:43 AM

i'm thinking the 1967 Chassis Manual will cover you:
http://www.teambuick.com/reference/l...ssis/index.php

if you look at the tool bar at the top of the page, you'll see a "Reference" button over to the right. lots of good stuff there.

**Tommie** · 01-14-2016, 01:30 PM

Manual does cover, but my entire harness and fuse block is toast. Has anyone used a Painless setup on 67 Full Size?

**65specialconvert** · 01-14-2016, 03:51 PM

Get the best http://www.wiringharness.com/

**bigdougsoutho** · 01-24-2016, 11:18 PM

Originally Posted by Tommie

Manual does cover, but my entire harness and fuse block is toast. Has anyone used a Painless setup on 67 Full Size?

If you need info or some photos of harness and wires (if you are attempting to snake your own) I can sure send you some. I rewired some on the car, but only what I had to, mostly because of heat issues related to the way the engine harness is mashed behind the ALT. I have decided to scrap the factory harness, or at least shelf it, and run new stuff through the frame, but I probably will not get that far until next winter. (I ain't what I used ta be!)

Doug

**Tommie** · 02-25-2016, 08:39 AM

Thanks for the help. M&H has pieces but not the whole harness with fuse block. I need a "headlight to tail light" harness package

**1965Buick** · 02-25-2016, 03:02 PM

Originally Posted by Tommie

Thanks for the help. M&H has pieces but not the whole harness with fuse block. I need a "headlight to tail light" harness package

You should call M&H, they do great work. What you are saying they could fab in three harnesses, that's my 2 cents!

Doug

**Tommie** · 02-26-2016, 12:38 PM

Doug,
Nice folks over at M&H. After speaking with them, they may offer the main harness and fuse block in the future but they aren't making now. Product range doesn't even include components to build.

**paulschroyersauto** · 04-08-2016, 09:42 AM

Hello Tommie, just wondering if you have had any luck finding the parts you need, Im actually looking for a 1967 Buick Electra 225 engine wire harness. Ive been to great lengths and still came up empty handed. Can you by any chance lead me in some direction that I might be able to find this engine harness? I greatly appreciate it.