i'm thinking the 1967 Chassis Manual will cover you:
http://www.teambuick.com/reference/l...ssis/index.php
if you look at the tool bar at the top of the page, you'll see a "Reference" button over to the right. lots of good stuff there.
Hello All.
Does anyone have as source for a engine harness for 67 LeSabre? Car is being restored with the stock 340 -4 drivetrain. Looks like a universal Painless 21 circuit the will work for the fuse/dash side. Any help would be appreciated.
Thanks,
Tommie
i'm thinking the 1967 Chassis Manual will cover you:
http://www.teambuick.com/reference/l...ssis/index.php
if you look at the tool bar at the top of the page, you'll see a "Reference" button over to the right. lots of good stuff there.
The way to crush the bourgeoisie is to grind them between the millstones of taxation and inflation.
Vladimir Lenin
Government schooling is about "the perfect organization of the hive."
H.H. Goddard, Human Efficiency (1920)
Manual does cover, but my entire harness and fuse block is toast. Has anyone used a Painless setup on 67 Full Size?
Get the best http://www.wiringharness.com/
JAMIE MCCLINTON
STARTER/ALTERNATOR/GENERATOR REBUILDER SINCE 1979
selling buick mini starters & alternators
startncharge@rocketmail.com
65 Special convertible
69 Special Deluxe
Lost to garage fire:
69 cali GS
72 Suncoupe
If you need info or some photos of harness and wires (if you are attempting to snake your own) I can sure send you some. I rewired some on the car, but only what I had to, mostly because of heat issues related to the way the engine harness is mashed behind the ALT. I have decided to scrap the factory harness, or at least shelf it, and run new stuff through the frame, but I probably will not get that far until next winter. (I ain't what I used ta be!)
Doug
Thanks for the help. M&H has pieces but not the whole harness with fuse block. I need a "headlight to tail light" harness package
Doug,
Nice folks over at M&H. After speaking with them, they may offer the main harness and fuse block in the future but they aren't making now. Product range doesn't even include components to build.
Hello Tommie, just wondering if you have had any luck finding the parts you need, Im actually looking for a 1967 Buick Electra 225 engine wire harness. Ive been to great lengths and still came up empty handed. Can you by any chance lead me in some direction that I might be able to find this engine harness? I greatly appreciate it.
Still looking but my research says an off the shelf harness from Painless is the way I may go.
Bookmarks