I cant even find a picture of it.
try the chassis manual:
http://www.teambuick.com/reference/library/57_chassis/
i need a little nylon bell crank that connects the turn signal mechanism to the cable that goes to the switch on the column. I cant even find a picture of it.Will take new ,used,or any advise i can get.
I cant even find a picture of it.
try the chassis manual:
http://www.teambuick.com/reference/library/57_chassis/
The way to crush the bourgeoisie is to grind them between the millstones of taxation and inflation.
Vladimir Lenin
Government schooling is about "the perfect organization of the hive."
H.H. Goddard, Human Efficiency (1920)
Hello John,
i am facing also a problem with my 1957 Special and with the directional turn signal plate. I have the problem that my one is broken. (see picture) Did you face the same problem? Or do you just need the nylon crank bell?
If yes, have you manufactured one plate by your own or did you buy a new one? Could you give me some hints were to buy?
That would be super! Thanks
I have the book but it dosnt show the little nylon piece.thanks for trying. John
I didnt see your pic. but on mine only the nylon piece is broken. John
Bookmarks