Results 1 to 1 of 1

Thread: Power Window Switch Fitting

  1. #1

    Power Window Switch Fitting

    Your help is needed with finding a part. My '66 Wildcat has power windows and there is an issue with the passenger side. The plastic fitting that pushes onto the back side of the up/down switch has nearly completely deteriorated. More specifically, this is the power lead that connects the switch to the window motor. The switch was recently replaced and tested to be good. The end connecting to the motor is OK. The end that connects to the switch on the backside of the door panel has the issue.

    Two photos are attached for illustration. Any suggestions you might have to replace this part would be greatly appreciated.

    Sincerely,

    Phillip McDowell
    Jacksonville, FL
    Attached Images Attached Images
    Phillip McDowell
    phillip.mcdowell@mac.com

Similar Threads

  1. Power window motor and switch
    By Ausie Bob in forum Electrical and Gauges
    Replies: 1
    Last Post: 09-18-2012, 02:22 PM
  2. Late 80's LeSabre power window switch help?
    By ahhh in forum Electrical and Gauges
    Replies: 0
    Last Post: 10-05-2009, 02:33 PM
  3. 1989 Riviera Power Window Switch
    By LC in forum Electrical and Gauges
    Replies: 0
    Last Post: 05-27-2007, 10:16 AM
  4. 64 Riviera power window switch
    By bperrix in forum Tools, Shops, and Garages
    Replies: 1
    Last Post: 04-11-2006, 09:23 PM
  5. 91 Century Power Window Switch
    By Mailman in forum Electrical and Gauges
    Replies: 4
    Last Post: 06-01-2005, 07:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
TeamBuick.com Privacy Policy