It is an actual wire, not a ceramic block, and is part of the wiring harness. Look for a wire with woven fabric insulation instead of the usual plastic covering.
Ray
Where is the resistance wire located on a '60 Electra ? I have checked the firewall and the inner fender, but no sign of it. Is it a ceramic block, or, as the name suggests, an actual wire and if so, how do I identify it ?
It is an actual wire, not a ceramic block, and is part of the wiring harness. Look for a wire with woven fabric insulation instead of the usual plastic covering.
Ray
In the '60 chassis manual, you will get an idea from figure 10-20 on page 10-34:
http://www.teambuick.com/reference/l...files/10-e.php
and from figure 10-95 on page 10-103:
http://www.teambuick.com/reference/l...files/10-j.php
WEBNOTE: When inserting an email in a posting, use the "smilie" @ so that web robots don't pick up your address and send you more junk mail!
Members can be contacted by clicking on their "handle", but you are much better off to post to the thread!
Thanks. Looking at that diagram, I should be able to trace it back from the relay to the coil. I will also read through the text and see if it indicates a resistance value so I can test it.
Bookmarks