I have a 263 dyna flow motor that is bad I bought a 263 motor with a manual trans my torque converter will not fit to the crank can I swap cranks or is there a easier fix
You can bore out the center hole to fit the converter hub, but the crank flange is also different and you will have some issues getting everything bolted up.
We have another member here with the exact opposite problem. You didn't say where you are located, but if you are close you might be able to work out some kind of arrangement with him.
http://www.teambuick.com/forums/show...rankshaft-swap
Ray
Last edited by raycow; 11-12-2013 at 09:09 AM.
Bookmarks