Something is VERY loose/too much play in the linkage
Junior Member
Hey All
I have a 1950 Buick with a Dynaflow. The trans engages and runs well. The problem I have is that while driving, over time the shift lever will slip down into low. On a really bumpy road, it happens much sooner. Being a novice to the Dynaflow, is there an adjustment to tighten the shift lever, or is this a function of some other issue? Appreciate any help you can provide. Thanks in advance.
Mike
Something is VERY loose/too much play in the linkage
Tom Telesco
Classic and Muscle Automotive
12 Cook St.
Norwalk, CT 06853-1601
Day Phone 203-324-6045 ET
NailHead Mini-Starters '53-'66
Adjustable Roller Tip Rocker Arms - All NailHeads
Custom forged pistons
Front & rear neoprene seals
Many other "Nail" parts
"If I can't get it, you don't need it!"
Junior Member
telrivOriginally Posted by telriv
Thank you again! Are you talking about checking the linkage from top to bottom? I assume that any point in the chain could be loose. Appreciate you being here on the forum with your help!
Mike
Last edited by Mike1947; 06-24-2012 at 03:52 PM.
Senior Member
Disconnect the linkage at the column. This will let you narrow down the area where the problem is.
Ray
Junior Member
Ray
Thanks for the help!
Mike
Posting Permissions
Bookmarks