- 1964-1967 SP400 Parts Images
- How to wire the Switch Pitch on a Buick Transmission
    - 400 auto codes
- BOP Bellhousings and Automatic Identification
Results 1 to 3 of 3

Thread: Dual path turbine drive

  1. #1

    Dual path turbine drive

    HELP! I have a very leaky dual path in my car and can't find gaskets for it. Rock auto shows a Fel pro # TOS18178. I ordered one and when I got it it seems wrong. Does anyone have experience with this trans that could give a little guidance. I would greatly appreciate it.

  2. #2

    Tranny pan gasket

    Hopefully these links will help. Both of these links are for the Napa website. The first link is the same Fel-pro part number you provided.

    http://napaonline.com/Catalog/Catalo...(P_RecType%3aA)

    If you go by what Napa says..... the TOS18178 number is for the 3-speed manual transmission, so not the Dual-path... Below is the gasket Napa is listing as the gasket for the Dual-path. I don't have my Dual-path stored at my residence so I can't get to it to check the pan shape to confirm. That we will leave up to you.

    http://napaonline.com/Catalog/Catalo...(P_RecType%3aA

    EDIT: PS.... I also have some info on the Dual-Path I can email to you. If you are interested in this info just shoot me a private message on the forum with your email address and I will forward you the information. I have done this for another member on the board. It's pretty good info from a MOTORS manual covering only transmissions.

    ....

    Hopefully this helps and will be the right gasket for you. Keep us updated so others can learn from it too.

    ~Dan
    Last edited by Buickspec6231; 12-08-2011 at 12:45 AM.
    Project car + budget = headache.

  3. #3
    Join Date
    Oct 2006
    Posts
    109
    Rep Power
    0
    Transmatic in Glendale,CA

    Northwest transmission parts

Similar Threads

  1. Dual Path 2 speed help!
    By miktu in forum Transmissions and Drivelines...
    Replies: 0
    Last Post: 05-24-2015, 11:04 AM
  2. Dual Path Transmission question
    By DomC56 in forum Transmissions and Drivelines...
    Replies: 4
    Last Post: 08-07-2014, 11:27 PM
  3. Dual Path U-Joint... to S-10 rear end?
    By rattrike in forum Transmissions and Drivelines...
    Replies: 0
    Last Post: 03-26-2014, 08:37 AM
  4. 62 special 198 v6, dual path trans
    By 6D2Special in forum Small Block 215, 300, 340 (and Rover V-8)
    Replies: 1
    Last Post: 12-18-2011, 10:14 PM
  5. 63 dual path trans problem ...help!!!
    By pinkyakabb in forum Transmissions and Drivelines...
    Replies: 2
    Last Post: 01-09-2010, 09:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
TeamBuick.com Privacy Policy