I was happy with the results I got from glass beads. Experiment on the inside. I would try a "fiberglass" repair kit", that should work weather or not you have the broken pieces.
Newbie
Does Anyone Have an Tips For Repairing The Snorkle Intake Area if It's Broken. Also, Whats The Best Way to Remove The Old Paint Without Damage to The Fiberglass?
I was happy with the results I got from glass beads. Experiment on the inside. I would try a "fiberglass" repair kit", that should work weather or not you have the broken pieces.
WEBNOTE: When inserting an email in a posting, use the "smilie" @ so that web robots don't pick up your address and send you more junk mail!
Members can be contacted by clicking on their "handle", but you are much better off to post to the thread!
Newbie
The Glass Beads Weren't Too Aggressive & Cause Damage The Fine Rib Lines on The Top Fiberglass Section? I Currently Have Aluminimum Oxide in My Cabinet & Thouth it May Cut Off The Detail. Did You Have Any Problem With Standard Fibergass Kits Adhering to The Original Air Cleaner Material?
Senior Member
I have walnut shells in mine for paint, dosen't do much more than paint.
Posting Permissions
Bookmarks