From the Reference Section:
- Street Cam Selection Guide
- Buick 455 O.E. Camshafts
- High 10's Secrets for Your Buick 455
- 400/430/455 Poston Cams Grinds and Numbers
- 400/430/455 Kenne-Bell Cams Grinds and Numbers
- Buick 455 Drag Strip Tests from Kenne-Bell
    - Buick 400, 430, 455 Engine Specifications
- Buick Staging Chart
- Differences Between 1970-71 And 1972 and Later Type Block
- Head Flow Chart
- Cam Button
Results 1 to 3 of 3

Thread: cylinder head porter

  1. #1

    cylinder head porter

    I have found a guy that wants to see what he can do for you guys as a cylinder head porter. His name is Chad Speier of Speier Racing Heads, He is very good at finding the rt Velocity and volume of air needed to a certain engine. He is one of five head porters out there with a wet flow bench and he has done every model except Buick Big Blocks and he recently tested a head and seen it needed more VE. I talked with him on about doing something with BBB heads and he has agreed to do so. He wants a cylinder head that has been fubared and only needs one intake port and one exhaust port to do his handy work and give you results, from there he can tell you what is needed in the cylinder head department. He wants to see if he can get his hands on T/A Stage 2,3,and 4 heads to see what he can do to better you guys. Go to this website and read what he does and you'll see what I'm talking about. http://www.speierracingheads.com/

    Gary Mc.

  2. #2
    you might want to have him contact TA Performance. now that they're producing brand new aluminum blocks that can support ~600 ci displacements they might be interested in cooperating with him on some development.
    The way to crush the bourgeoisie is to grind them between the millstones of taxation and inflation.
    Vladimir Lenin

    Government schooling is about "the perfect organization of the hive."
    H.H. Goddard, Human Efficiency (1920)

  3. #3
    Thank you, I'll have to write them.

    Gary Mc

Similar Threads

  1. Staight 8 cylinder head
    By BIG DON in forum Straight Eights!
    Replies: 2
    Last Post: 04-28-2015, 02:29 PM
  2. 1948 320 cid cylinder head
    By handysrandy in forum Straight Eights!
    Replies: 0
    Last Post: 05-14-2014, 06:47 PM
  3. Cylinder head swap
    By frank-k in forum Straight Eights!
    Replies: 1
    Last Post: 04-23-2011, 03:08 PM
  4. need help cylinder head rmoval
    By ben455ss in forum Big Block: 400, 430, 455
    Replies: 6
    Last Post: 04-29-2010, 10:57 PM
  5. 1952 cylinder head
    By mcubie in forum Nailhead: 264, 322, 364, 401, 425
    Replies: 1
    Last Post: 08-08-2009, 01:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
TeamBuick.com Privacy Policy