you might want to have him contact TA Performance. now that they're producing brand new aluminum blocks that can support ~600 ci displacements they might be interested in cooperating with him on some development.
I have found a guy that wants to see what he can do for you guys as a cylinder head porter. His name is Chad Speier of Speier Racing Heads, He is very good at finding the rt Velocity and volume of air needed to a certain engine. He is one of five head porters out there with a wet flow bench and he has done every model except Buick Big Blocks and he recently tested a head and seen it needed more VE. I talked with him on about doing something with BBB heads and he has agreed to do so. He wants a cylinder head that has been fubared and only needs one intake port and one exhaust port to do his handy work and give you results, from there he can tell you what is needed in the cylinder head department. He wants to see if he can get his hands on T/A Stage 2,3,and 4 heads to see what he can do to better you guys. Go to this website and read what he does and you'll see what I'm talking about. http://www.speierracingheads.com/
Gary Mc.
you might want to have him contact TA Performance. now that they're producing brand new aluminum blocks that can support ~600 ci displacements they might be interested in cooperating with him on some development.
The way to crush the bourgeoisie is to grind them between the millstones of taxation and inflation.
Vladimir Lenin
Government schooling is about "the perfect organization of the hive."
H.H. Goddard, Human Efficiency (1920)
Thank you, I'll have to write them.
Gary Mc
Bookmarks