From the Reference Section:
- Auto Refinishing, featuring Brian Martin
- Body Cross Reference,A,B,C...
- 1967 Hood Scoop Installation Pattern
Results 1 to 5 of 5

Thread: Pass inner Fender

  1. #1
    Join Date
    Jan 2010
    Posts
    21
    Rep Power
    0

    Pass inner Fender

    Is a '72 Chevelle inner fender the same as a '72 Skylark? Mine is ate up with rust...


    thanks
    mpvance


  2. #2
    Join Date
    Jun 2009
    Location
    Waring, Tx
    Posts
    442
    Rep Power
    0
    No, they are not the same as a chevelle, or any other A body. You can now get reproduction inners. Good used ones are very hard to find, but there are some. You can also get a patch kit to weld on if the rust you have is under the battery tray.
    86 GN, all factory options, engine build in progress
    72 Skylark Convertible, 462, TH 400
    72 GSX Clone 464, TH400, 3:42. 10.71 @126mph best

    We build GM carburetors and specialize in custom built Quadrajets

    www.quadrajetpower.com
    mark@quadrajetpower.com

  3. #3
    Join Date
    Jan 2010
    Posts
    21
    Rep Power
    0
    I'm not sure a patch would suffice, the rot is almost back to the well. Who makes the reproductions and the patches?
    mpvance


  4. #4
    Join Date
    Apr 2006
    Posts
    450
    Rep Power
    0
    Try Year One. There are a few others that sell the patches also. I bought the 3 piece kit to fix my radiator support and had it put in by a buddy of mine that has a body shop. Worked real good. You will probably need it too if the front of the fender well is gone the saddle ( radiator support ) probably ain't far behind it.
    Almost all the restoration sites that advertise Skylark and GS parts will have or can get these patch panels.

  5. #5
    Join Date
    Jun 2009
    Location
    Waring, Tx
    Posts
    442
    Rep Power
    0
    I have some repairable inners if that would help. they still need the patch, but only issue is under battery.
    86 GN, all factory options, engine build in progress
    72 Skylark Convertible, 462, TH 400
    72 GSX Clone 464, TH400, 3:42. 10.71 @126mph best

    We build GM carburetors and specialize in custom built Quadrajets

    www.quadrajetpower.com
    mark@quadrajetpower.com

Similar Threads

  1. can I add pass side outside mirror to 75 LeSabre?
    By jbush66 in forum Restoration Talk
    Replies: 1
    Last Post: 09-26-2013, 11:10 PM
  2. Vacuum Line Firewall Pass-Through -- 66 Wildcat
    By pwmcdowell in forum Nailhead: 264, 322, 364, 401, 425
    Replies: 2
    Last Post: 06-03-2013, 04:34 PM
  3. Punt,Pass or Kick ?
    By 58 Roadie in forum Tools, Shops, and Garages
    Replies: 6
    Last Post: 03-07-2011, 06:37 AM
  4. heat on drivers side a/c on pass?
    By itsjinx5 in forum Climate Control, Heaters and A/Cs
    Replies: 3
    Last Post: 09-29-2009, 02:59 PM
  5. 70 inner fender?
    By gsxr-rider137 in forum Restoration Talk
    Replies: 0
    Last Post: 05-02-2008, 01:51 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
TeamBuick.com Privacy Policy