Clean the ground at the rear and check for the correct bulbs in the socket( Look for a single bulb in a dual socket ) HTH
John
Hello everyone!!
I'm kind of new round here and this is my first thread wow !! ... recently I bought 1976 Buick Century 4door 350CUI and one of few problems are indicator signals. Rear lights got 3 bulb for each side .. and when i turn on road light and put hazard switch or left indicator it blinks with 2 bulb ok .. but one of them goes off completely works like 0-1 ( off - on ) without fading like on the other side. Or how they should work properly? Damn hard to explain especially with my bad English. I try too put a video so it will be better to understand
Greetings from eastern Europe )
Clean the ground at the rear and check for the correct bulbs in the socket( Look for a single bulb in a dual socket ) HTH
John
Guyopel
The early bird gets the worm but the second mouse always gets the cheese.
Bulbs seems to be correct all dual 21/5W ... funny that in all sockets someone puts some sort of grease I suppose for rust protection or so but maybe here's the problem... I'm going to clean this first and check the voltages. Hope this is not transmitter problem or it could be?
guyopel You were right about the ground. There were no grounding on the sides inside the socket just made some workaround and it worked like a charm ) ... thx !!
Bookmarks