I have a '68 GS 400 convertible that I want to convert to power disc brakes in front and was have a couple of questions/concerns.
1. What back spacing is required to clear the calipers, etc.?
2. How wide a wheel will work and not give me turning problems?
I was considering either 15" or 16" wheels, either 6 or 7 inches wide. Not sure what size tire, maybe 235X60.
Thanks for any assistance.
Jim V.
I'm about to install the Scarebird disc conversion kit on my 64 LeSabre. The rotors/calipers I have are from a 73 Electra - I'm going to try to mount a set of alum rims with 225/75R15s. I don't think 16s would give you the turning radias you need.
I'll post the results here - I started another thread on the front conversion, check that out for some of your questions.
Butch
64 LeSabre 310
64 Wildcat 445
Bookmarks