A computer will have absolutly no effect on the tranny, several things could have happened here, if you separated the engine and tranny you may have not engaged the front pump with the torque converter, you usually have to spin the converter till in seats in the pump before you put it on the engine, or it could have slipped out during insallation,if the pump is not engaged when you start it the locking tabs could get snaped off requiring replacement, another could be the lincage is not correct or out of adjustment, check the lines again make sure you have vacume from the engine to the modulator, make sure the modulator is in there the right way and working, check the passing gear or kick down is in the right position, usually if it ran when you bought it it should work now unless it was "used car'd" just before you got it
Bookmarks