The right way is to remove the right inner fender well. Way back when we would cut an access flap in the fender well, tack it back up when done, & seal it with sealer.
i have 70 buick gs 455 and need info on how to remove old core and location of it .also my fan does not work either,where is the fan and how hard is it to reach?any help is greatly appreciated thanks
The right way is to remove the right inner fender well. Way back when we would cut an access flap in the fender well, tack it back up when done, & seal it with sealer.
Do a seardch There is a way to do it by drilling out the bottom right bolt on the inside cover
Joe T
37Buick coupe /455 powered
40 Super convert
72 GS455 convert 13.0/105
69 Buick Sportwagon
92 Road,aster wagon
04 Rendezvous
You disconnect the hoses at the firewall ,and the core is removed from under the dash. The inner cover must be removed and the right hand bottom bolt either must be drilled out or the fender removed to get at it.
Joe T
37Buick coupe /455 powered
40 Super convert
72 GS455 convert 13.0/105
69 Buick Sportwagon
92 Road,aster wagon
04 Rendezvous
Also for the fan acces you can carefully unbolt the passenger inner, use a wooden block and rotate the inner clockwise with the outer fender still in place. But check the ground wire the fan to the firewall and the dash switch first.
i got er done info was spot on .go fast with class
I'm glad it went well
Now you don't have to worry about antifreeze on your carpet
Joe T
37Buick coupe /455 powered
40 Super convert
72 GS455 convert 13.0/105
69 Buick Sportwagon
92 Road,aster wagon
04 Rendezvous
Bookmarks