Meant A 65 Sp400
I Swapped My 64 Wildcat To A 64 Switch Pitch Trans. I Now Need A New Floor Shifter That Has The Extra Stop For Second Gear. Does Anyone Have One That They Are Willing To Part With Or Has Anyone Successfully Put In Some Kind Of Aftermarket Type Into The Floor Consol. Thanks Jam
Meant A 65 Sp400
When I did a similar swap on my 66 skylark GS, I drilled a new hole in the shift rod lever that goes thru the floor. The new hole is closer to the levers center pivot point, so it gives more travel at the other end.
You could achieve the same effect by putting a shorter lever on the transmission.
If you go this route, you'll have to make new detents in the shifter.
Walt
65-66 GS's
That The Part Im Concerned With Is The Detents On The Shifter. Wondered If The Newr 65 Or 66 Part Would Fit On My Flor Shifter
Bookmarks