Have you looked through the information in the reference section? Look in Years too.
Please help me understand what I have. I would like to know if I really have the original 322 nailhead in my 1954 Buick Century and what the body tag means but I am having a hard time deciphering them. Any help would be appreciated.
Have you looked through the information in the reference section? Look in Years too.
WEBNOTE: When inserting an email in a posting, use the "smilie" @ so that web robots don't pick up your address and send you more junk mail!
Members can be contacted by clicking on their "handle", but you are much better off to post to the thread!
If you post the data of your body tag, we can help you.
A look at this thread might be interesting, too:
http://www.1954buick.de/cgi-bin/yabb...num=1209450523
I started digging through the reference section and that is what prompted me to make the post. Where can I find y body tage? I was looking for it last night but did not find it.
As described at the top of this page:
http://www.teambuick.com/reference/y...4/54_body.html
The correct numbers for engine identification can be found here:
http://www.teambuick.com/forums/view...=indent_engine
Last edited by Bob; 08-08-2009 at 07:09 AM.
WEBNOTE: When inserting an email in a posting, use the "smilie" @ so that web robots don't pick up your address and send you more junk mail!
Members can be contacted by clicking on their "handle", but you are much better off to post to the thread!
I am either looking in the wrong spot for the body tag or it is missing. Can somebody share a picture of where their body tag is?
The frame tag says:
BUICK
6 A1165773
The number printed on both sides of my engine block is 1165649-9. That does not seem to correspond to anything on http://www.teambuick.com/forums/view...t_engine_53-58 but it looks like other V-8 322s that I have seen pictures of.
Pictures of the frame tag and # on the engine are here http://picasaweb.google.com/mjsandbe...zh1YKP1PeswgE#
Once again thanks for the help and your patience, this is all new to me.
Last edited by mjsandbe; 08-08-2009 at 02:13 PM.
Before you try to use the numbers, you need to have the correct ones:
http://www.teambuick.com/forums/view...t_engine_where
The body plate should be on top or on the right side of the cowl under the hood.
Your frame number should be the same as the one on the door post and is the vin. The breakdown is in the reference/years/55/vin
WEBNOTE: When inserting an email in a posting, use the "smilie" @ so that web robots don't pick up your address and send you more junk mail!
Members can be contacted by clicking on their "handle", but you are much better off to post to the thread!
The engine S/N is stamped in 1/4 inch numbers on the left side of the block deck.
Airy Cat
1954 41D
1955 46R
1956 63D
1998 Jeep Wrangler
2007 Corvette Coupe
I am making some progress. Here is a good picture of the body tag
Looking at the tag, you have a 1954 Buick Century Tourback Sedan model 61. E-mail me at richardcrowecharter.net and I will sent them to you directly, they are in Microsoft XPS Document writer (xps) format. I hope this helps you out.
Bookmarks