From the Reference Section:
- Carter Dual 4-Barrel Carburetor Idle Adjustment
- Carter Dual 4-Barrel Carburetor Adjustment
- Carter Dual 4-barrel Carburetors, Linkage Sticking
- Buick Cam Specifications for 401 and 425 nailheads
- Buick Cams from Kenne Bell, 401, 425
    - Nailhead Engine Specifications
- Head Flow Chart
- Nailhead Oil Pump
- Nailhead cam specs and cam selection
- Nailhead Parts Interchange
Results 1 to 2 of 2

Thread: 1957-58 Dynaflow crossmember interchange

  1. #1

    1957-58 Dynaflow crossmember interchange

    Hello Forum.I have a 1958 Buick Limited that still has the original flight pitch trans. It is out of the car.I have rebuilt and changed to a variable pitch in one of these before,so all that info is not needed.I want to put a variable pitch trans in this Limited.I do not want to rebuild the flight pitch because of the parts difficulty and extra expense.However,I may have a chance to get a 1957 Roadmaster parts car.I have not dealt with a 57 before and if I happen to get one,will the crossmember and linkage fit a 58? I have a feeling the crossmember won't,but need to verify this with someone out here that knows these cars.

    Lee Gathers

  2. #2

    crossmember length

    Hi Group,This post may have been better suited for "driveline" section,but to make it short I got a 57 parts car last week and the crossmember is only 18 inches long.Much shorter than 58.The 57 uses a box section off the frame,on either side that 58 doesn't.It makes getting to the bolts easier for removal,but maybe it was a weak point.Not sure.

    Lee

Similar Threads

  1. 1957 364 intake manifold interchange?
    By roc146 in forum Nailhead: 264, 322, 364, 401, 425
    Replies: 10
    Last Post: 12-11-2012, 04:56 PM
  2. Dynaflow interchange?
    By Ornberg in forum Straight Eights!
    Replies: 5
    Last Post: 02-06-2010, 02:18 AM
  3. Dynaflow/400 interchange?
    By Rev58 in forum Nailhead: 264, 322, 364, 401, 425
    Replies: 4
    Last Post: 04-02-2009, 03:01 PM
  4. Dynaflow/400 interchange?
    By '64 Flxible in forum Tools, Shops, and Garages
    Replies: 2
    Last Post: 02-05-2006, 07:01 PM
  5. parts for 1957 dynaflow
    By nicola in forum Transmissions and Drivelines...
    Replies: 12
    Last Post: 04-26-2005, 09:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
TeamBuick.com Privacy Policy