I would play it safe and use the additive:shield:
Type: Posts; User: Buickman225
I would play it safe and use the additive:shield:
:jeez:I'm here in Middletown CT gas here is 3.25 a gallon! Drivin these big buicks is getting expensive!!!:shield:
I HAVE A 1977 BUICK ELECTRA 225. EVERYTIME I RUN THE A/C FOR A WHILE THE FAN CUTS OFF. WHILE IT IS WORKING IT ONLY HAS 1 SPEED. I CHANGED THE SWITCH IN THE DASH BUT THE NEW ONE DOES THE SAME THING....
I have a 430 engine for sale. It came out of a 1968 buick electra225 e-mail me @ buickman225@yahoo.com if your interested.
I know the trans will bolt up I am worried about the motor mounts and the exhaust
I have a 1978 Buick Electra 225 with a 403, i have a 430 out of a 1968 Electra 225 with 83000 miles on it. I want to put the 430 in my 78 Electra what kind of problems will I run into???
Never experienced that problem but I do have a 1989 Riviera parts car give a shout if you need anything!
Thank you I will check into that!
I have a 1978 Electra 225 with a 400 Tranny can anyone tell me what color the plastic gear is for that car to control the speedometer??? With someone rolling next to me on the hiway my speedometer is...
I understand that the 78 electra 225 had a disc brake option so there should be some in the bone yards I've been looking no luck yet!
I also have a 78 225 and would like to do the same thing if you find out anything please pass the info to me. Also are you able to find any body parts for it?
I have been told that there were rear disk brakes on some Electra/park avenues between 77 and 79 does anyone know if this is true or better yet were can I find one or is there an aftermarket...
Sounds like you have a bad fuel injecter I had the same problem with my 90 Lesabre
Well I have load leveler gas shocks on the rear and station wagon springs already I hear they have a stabilzer bar that is made for the new roadmasters to prevent rear body roll that fit right on the...
I have a 1978 Electra 225. Does anyone know how I can stiffin up the rear end. there seems to be some play back there when going around curves :confused:
Send it to me at buickman225@yahoo.com
Sounds like you have a vacum problem to me. Tell me what kind of cam did you use I am getting ready to rebuild my 403
Thanks but I found a guy in New York that specializes in Rivieras from 1980 to 1985 If anyone looking for parts you can reach him at whitedmdext@aol.com graemlins/shield.gif graemlins/banana.gif
I just got my 1984 Rivera back from the paint shop and on the way home the tread came off the tire! It wiped out the innner whell well, dented the bottom of the fender :mad: Does anyone know were i...
I will start with the gound wires and keep you posted Thanks for the help graemlins/shield.gif
I just added a 1984 Buick Riviera to my collection. The gas needle is on about half tank no matter how much gas is in it Is it the gauge or the sending unit in the tank or could it possibly be a bad...
Thanks I believe I changed that but i did not check the wire I will check it today! graemlins/shield.gif
I'm having some sway problems in the rear end. From what I can see there are no sway bars. Should there be or do they make anything aftermarket to stiffin up the rear end? graemlins/shield.gif
I have no hi position on the fan when the a/c or heat is on. Low and mediem work fine. Any ideas??? I replaced the switch, high low switch already, could it be the fan it self? :confused:
I believe the stock tired size is 225/75/R15 graemlins/shield.gif