Search:

The washer hoses apparently were taken out of the system before I purchased the car so the vacuum line goes directly to the top of the fuel pump(which I just had professionally rebuilt) . Yesterday I...

Found the problem. Must have fried the amp meter. Power in but no power out. Ran a new feed from light switch terminal #1 back to starter.

would anyone have a schematic or instructions for rebuilding the vacuum motor. Nice to have info before taking it apart. I replaced all the rubber lines from the fuel pump and I still cany get the...

Well like I previously mentioned, the previous owner put the wrong bulb in the dome light housing and when I tried to put in a new fuse I apparently melted the connection in the Amp meter. I tested...

The cable itself is overall shot. It was so badly rusted when I got the car that the wire inside and the outer housing are just fused together. Als the end of the cable that hooks onto the vent lever...

Thanks very much, I really appreciate the reply and the help. By the way, can you possibly be more specific as to how old, would my local lawnmower repair shop possibly have these?

1950 Super

Wow, thank you so very much. I am really impressed with your reply, something so simple apparently has been very destuctive. Yes I had the wrong bulb in the dome light, it was already there when I...

Does anyone have a suggestion as to what cable is a good replacement for the vent controlls? 1950 Buick Super?

I am probably going to do the same, the wires are just falling apart. I found a fuse panel on Ebay that still had the connectors so I bought it just to be on the safe side. Before I pull any wire out...

did you measure the size needed? I am going to have the same issue but have not pulled one out yet and measured it. www.RIWire.com has several size connectors listed.

Did you have any luck finding these connectors or a good alternative? I am probably going to hgave to rewire much of my car as well, have already started under the hood!