I have no readings on temp gauge .I was doing some work under the hood afew days ago ( it was cold as hell out ) and i thought i may have knocked a wire off but could see nothing off . The web sights...
Type: Posts; User: m/w
I have no readings on temp gauge .I was doing some work under the hood afew days ago ( it was cold as hell out ) and i thought i may have knocked a wire off but could see nothing off . The web sights...
I've been running a T 350 behind my 455 for years and flogged on it and its still ok . But a couple of guys i know from around home tore it down and put lots of good parts into it and never a problem...
here's a forum i found quite interesting , its called hot rodders and this is there wiki site .http://www.crankshaftcoalition.com/wiki/Crankshaft_Coalition_Wiki hope this gives the info you are...
On my 91 rmw the cp locks are located just under the door latch in the rear door itself . Later bake
Hello from the great white north(canada) . Would it be possible to use a small air tight stove as backup avery little wood lasts a long time just a thought . later bake
Good day eh from the great white north . OK i have a 91 RMW that needs body work 'i can find front fenders ok but no patch panels for the rear. The one that's the kicker is of coarse the pass side...
abit early but merry christmas & happy new year from the great white north ,work safe & love your family . later bake
Hello from the great white north . I've got a 78 Z28 with a mild 455 (2nd engine) & heavyly modified t 350 .You will so like to play with this thing when its all together and running . the boys have...
Little bit of a sidetrack if i may ,its crude but effective . We were putting a 71 455 into a 76 electra (yrs ago) when my buddy set the engine down a little hard & dinged the oil pan a good one but...
Any brackets from 400,430 or 455 will work , i'm not sure about small block stuff to big block but i don't think so . any way good luck & hello from the flat lands of Sask .Later Bake
don't know if this will help or not but try www. fusick .com , its an olds site but back then i think it was pretty much the same running gear . Hope this helps . Later bake
That is a good idea also lets u see if there's schrapnel in bottom of oil pan . If this is an electronic tranny could be sticky solenoid . Later bake .
There should be 2or 3 sites that can help u 1)http://www.impalassforum.com/vBulletin/index.php & 2) http://www.buickforums.com/forums/forumdisplay.php?f=22 these two should be able to help u very...
Can't see y it would n't be a very good ride , i my self have a BBB in a 78 camaro . ITs nice to keep engines with the correct division but some times u go with what u got. Later bake
local auto wrecker
Right on brother & drive safe , 2 bad u couldn't find a pontiac 455 thats an excellent R&R machine . Later Bake
Like i said really sorry couldnt help u more . This swap did take time to do but was well worth it. I bought a set of t/a long tube headers 4 a gs and i think theyre going to work out ok, bit of fun...
Shoot sorry brother been busy lately & haven't been on the board i'm really sorry for u this is not a drop in like chevy . Are u using the original 455 mounts cause with out modifying the subframe ...
Same thing with my 91rm s/w ,the anti lock lite is on all the time but the brakes work great . . Could this be a short or air lock in system ? later bake sorry i'm not any help
Just curious if & how the engine swap is going. Forgot to tell u that i had to run a gas line up the passenger side of the car Don't know which side the pontiac one runs on, the stock chevy one runs...
Well my friend there's nothing puny about the kit I installed, it was same dimensions as factory , also i should not have used pst the kit i put in was competion engineering . Still made hell of a...
Ok old guy print .I used motor mounts out of 76 electra .Took pads out of 76 frame mounted to engine , dropped in engine bay Leveled engine side to side ,tack welded motor mount pads & pulled donor...
I think u people down south have far more access to aftermarket parts then i do . This was the only header(t/a) that didn't kill my pocket book. Hookers 4 a gs where i live were 800 for non coated...
had a very quick look in the hamb (dont ask) & this may help u if not the archives are unreal . later bakehttp://www.jalopyjournal.com/forum/showthread.php?t=41585&highlight=dual+master+brakes
tanks 4 the input i kind of thought it would be 2 good to be true. any ways thanks again bake