PS car also has a 2500 stall convertor
Sent from my SM-N920T using Tapatalk
Type: Posts; User: 350Bandit
PS car also has a 2500 stall convertor
Sent from my SM-N920T using Tapatalk
Hello recently rebuilt my 70 Buick 350 SP code bottom end was wiped out so replaced all. Motor has a TA stage 1 manifold, stage 1 Springs and timing chain, cam is a TA 310-350. Rebuilt a used...
Turns out cam is ok lifter collapsed completely I am replacing.
Sent from my SM-N920T using Tapatalk
During break in oil psi dropped to 0 for about a minute or two went and bought booster plate put on right away before going any further. Pressure held steady after. Gonna measure my 290-94H cam and...
I did not know that i'll consider. Currently am debating on continuing on with 350 or putting my into my 70 SF code 455 I have on a stand motor is really clean so just going through options
Sent...
I did not know that i'll consider. Currently am debating on continuing on with 350 or putting my into my 70 SF code 455 I have on a stand motor is really clean so just going through options
Sent...
Unfortunately cam lobe was wiped out and not a exhuast leak discovered this morning.
Hi there BuickV8 community, I'm having a issue with my 70 350 I recently rebuilt. There is a loud ticking when I'm driving and is quite will at idle. There is no tick upon start up or once warmed up...
I used a rear main seal from a Ford 460 have no leaks
Sent from my SM-N920T using Tapatalk
I got rid of rope seal and used a Ford 460 ream main seal mounted off center and no leaks in my 350
Sent from my SM-N920T using Tapatalk