Thanks!
Sent from my iPhone using Tapatalk
Type: Posts; User: martinsonjd
Thanks!
Sent from my iPhone using Tapatalk
http://uploads.tapatalk-cdn.com/20161103/7465c2e41a8bbf594268b62c2e27e424.jpg
New Wheel Stud (pretty and STRAIGHT) - Old Wheel Stud (grimey and BENT)
All done and back on the road!
Sent...
'65 Wildcat driver in need of a functioning speedo cable, with the "plastic" spring loaded end that connects to the speedometer, and the normal metal screw-on end to the transmission.
Can't seem...
Wound up taking a 5 lb hammer, knocking ea one with 2-3 hits... they came right out. Took each new wheel stud, applied a small amount of anti-seize just under the flared end, and with a breaker bar,...
Any suggestions, tips, lessons learned or helpful hints on replacing wheel lugs/studs..?
Got a '65 Cat, finally got the rear drum off after some MAJOR effort with a pry bar to do some needed brake...
Wellllllll... Pic # 13 wasn't really "immediately" after the removal of the drum... This one is. And you can see the "red" spring was there.
Guess I took it off and THEN thought to snap a pic of...
I did a side by side of my pic against the one on the right you have here, and I count 8 springs in my and your pic (minus the parking/emery brake spring). I don't see which one I'm missing.
...
Here's a pic of the brake set-up right after I pryed the drum off prior to changing the pads, springs, and wheel cylinder.
From what I can tell, the wheel cylinder pins are angled upward slightly...
Evening gents.
I didn't bother changing wheel cylinder links. I just applied some brake cleaner, sanded off the rust and residue, and after inspecting them, put the same links back in.
From...
I replaced he cylinder, both shoes, pins, and all the springs.
The short shoe was the forward shoe.
Everything's back together but now the brake drum will not seat. It feels like the inner...
Dr. Frankenbuick: I guess you were right!
I used a pry bar while rotating the wheel. It took a min, but I got the drum off.
Not sure what the hang up was, as I don't see anything that was...
https://vimeo.com/179666104
Is there a clip or something on the backside keeping the drum from coming off the wheel hub?
Sent from my iPhone using Tapatalk
It's stopping at the edge of the center hub I have pictured
Sent from my iPhone using Tapatalk
SOLVED!
New to the old school car scene. Trying to rebuild the rear brakes on my '65 Wildcat. Never seen this "hub" before and am wondering what tool I need to get this hub off so I can remove...