Yes it was a leaky core. Thanks for your help
Type: Posts; User: colpibr
Yes it was a leaky core. Thanks for your help
Thanks Suntree, I will pull the core out and check.
67 Wildcat .....I have steam/fog coming from my heat vents when I turn the heater on. I checked the hoses running to the heater and they are tight and there is no sign of coolant on the inside of the...
Hi, I have a 67 Wildcat and the front hub has a loose race that turns in the hub. Can this be repaired by machining and placing an oversized race and bearing in place of the old ones? Any other...
Hi, I was told my outer bearing cup is not held in tight on a 1967 Wildcat. Will the drum need to be replaced?
Hi, I have a wiper motor wiring problem on my 67 buick wildcat. Does anyone know which wires i need to solder to the back of the 3 pronged plug and in what order? I broke the resister off my plug but...
Hey Captain America, Did you try to replace your top yourself? I'm thinking of doing mine and wonder if you have any tips.
I did what you said and checked the fuel lines and then tried to suck fuel from a gas can. It seemed to pump just fine. I then tried to force fuel through the line directly to the carb and it...
Thanks Doc. I will definitely try the line to the gas can from the pump first. I already changed the filter and someone else suggested that it might be the needle in the carb.
Thanks for the great...
Hi, I have a 67 wildcat with a 430 and it doesn't seem to be getting fuel. It will run when I fill the carb bowl but only for a minute. I took the fuel line off at the carb and it pumps fuel when I...
Found it.....20 ohms. "seek an ye shall find"
Oops! Would the cleaning methods for power steering vary from year to year?
Howdy, I was checking the fluid level in my power steering and noticed a sludge buildup. I removed the pump, filled it with fluid and shook it up to see if it would come loose. Most of it came out...
Thanks Bob, I checked the gears and they are all in very good condition. An older mechanic told me that they used to have a lot of trouble with the rubber diaphram sticking and causing the motor to...
1967 Buick is my car and the windshield wiper motor will work sometimes but will only make a clicking noise other times. The ground seems to be good when checked with a test light. Any suggestions as...
Hi Bob, I just purchased a top from convertibletopguys.com for a 1967 Wildcat. Delivery was quick but I haven't installed it yet but they had a good price and package included a lot of items that...
I figured it out; after doing it in the incorrect order :) Door hardware and chrome trim first -then power window motor & tracks(don't bolt the power window motor in so you can move it around to...
Thanks Bob. I will check PayPal and see if they do accept credit cards. If not, do you accept email fund transfers?
Brian
Is PayPal the only payment method to upgrade my membership?
Thanks
Happy New Years! Does anyone know what order to reinstall the side door windows and door latches on a 1967 wildcat convertible with power windows? I forgot to make a note of the order.
Hi, I'm putting my doors, fenders & hood back on the 67 Wildcat and was wondering if anyone has any good tips as to how to align the parts? I have never done this before!!
Thanks.
Hi, I'm wondering if anyone can tell me where a good place is to buy carpet for my 67 wildcat? Will regular carpet form easily to the floor or is it best to buy molded carpet?
Hi, I have my 67 Buick to bare metal now. I have some ProForm 2k, epoxy primer, 661c and was wondering if I should prime the bare metal before I fix some dents with bondo or bondo first then primer? ...
I just replaced all four body bolts and trunk floor metal that was rusted out above them. I cut out the rusted floor, which was only rusted above the body mounts, and welded in new sheet metal. It...
Howdy, I need to do a rust cut-out/repair on my 67 buick rear wheel well and have the body off the frame and blocked up. Would it be ok to do the repair with the body off or should I put it back on...