I Private Messaged you 32 special. Thanks.
Type: Posts; User: 36 Century
I Private Messaged you 32 special. Thanks.
http://i.imgur.com/o86OCxd.jpg
http://i.imgur.com/p2unw6A.jpg
http://i.imgur.com/KEIvkfe.jpg
http://i.imgur.com/mel0V3i.jpg
http://i.imgur.com/qYC2DEJ.jpg
http://i.imgur.com/5EjEV98.jpg
http://i.imgur.com/whzFGkd.jpg
Hello, I decided to rebuild my motor recently, and figured I would share some photos. I had cast pistons in it, and after many hard years of racing, the ring lands were getting loose, and was...
Hello, looking for a 263 timing cover that can use a conventional front main seal, rather than the packing. Does anyone have a decent one with minimal to no pitting that they would be willing to get...
Have built another batch of roller rockers for the Buick straight 8's. We have 248 Series and the 320 Series. Most are in 1.6 ratio, and some in 1.5 ratio (stock). The 1.6 gives a nice upgrade to...
Yes. We mask everything but the ball socket for that reason.
So we have always had problems with the stock rocker armadjusters breaking during the valve adjusting process. Well new rockeradjusters have not been available for quite some time, and the ones that...
You mean a clear valve cover like this?
http://i.imgur.com/AJYZeYh.jpg
What the different ratios do is modify the actual valve lift and opens and closes the valves sooner and later at specific cam intervals.
A 1.6 set will give a performance increase on stock cams...
These are setup for stock valve height.
These rockers are setup for stock positioning over the guides.
With enough demand, we now have built 1.5 Ratio roller rockers for the Buick Straight 8's. This completely new rocker arm assembly consist of all brand new components. New billet rocker arm stands,...
For the right guy we would build a set. Pricing would be inline with what carillo and such charges.
We always re-babbot and bore our bearing shells to the desired size. You can get mains re-babboted from guys that do that for around 200.00 also.
My phone number is 602-692-2677. Need this asap or we gotta head home.
Hello all. We have come from phoenix to el mirage in California. We left one wheel bearing inner race for the front of our landspeed car. Anyone in California have one? Pn 909532. I am also looking...
Oh, I don't do it for the market, in fact the complete opposite. I wouldn't want anyone else to have what we have on our car. That's how we set and keep records!
I know of a billet head in the works.......
3.625" stroke. 3.700 bore. 311 cubic inch. About 360 HP and 350 foot lbs.
http://youtu.be/k-Ic9TcY-ms
Custom billet short stroke crankshaft. Billet rods. Roller cam. Roller rockers. Electronic fuel injection. 8 individual coils. 6750 rpm. 7000 redline.
Here is the mockup setup of a speacial series. This setup features the 1.6 Ratio, with full bronze bushings, on the new hardnend shaft. Notice the heli-coiled threads where the stock adjusters go. ...
These are 17-4 Stainless.
Yes. Fea testing in solidworks simulation.
Hello All,
For our current land speed motor, we are running a shortnened stroke crankshaft. Therefore we needed custom length rods to make everything work. So we designed these rods, which are...
That's what clear valve covers are for. :)