Great advice as always.
This forum is so usefel !
Whycome I don't have an R.B.O.A. # ? ..lol
Thanks for the advice...BTW have lots of 63 Riv parts that I would practically give away because I hate...
Type: Posts; User: bbernor
Great advice as always.
This forum is so usefel !
Whycome I don't have an R.B.O.A. # ? ..lol
Thanks for the advice...BTW have lots of 63 Riv parts that I would practically give away because I hate...
Hey Butch:With regard to no temp/cold/hot/fuel- etc guages: I have replaced the trashed curcuit board and will check for ground interruption with ohm meter BUT..could anything else be causing this?...
[quote=WildKitty;69008]Bruce,
I'm assuming you have a volt/ohm meter...
set your ohm meter on "beep" and go around the circuit board and check for ground connectivity. if you find a break in the...
Hey guys: FINALLY got the plug out which required welding a socket to the nut...then two Hail Marry's with a torque wrench and voila.Had to play hardball on that one.
Yes cheezeman brakes are good...
Hey All: Yes "Wildkitty" you are right on target and thanks to "Cheezman" late last night I figured it out.What I was unaware of is the switch is actuated by fluid and screws onto the back of the...
Thanks Cheezeman ! Yes your Att came through.I think I attached a pic of my master with the two prong ble wire plug draped unceremoniously over the master cylinder.Yes there is no male receptacle to...
Hey Butch thanks for the reply.I have not replaced the switch yet because there are no wires connected to it and since I have a homeless set of wires in the neighborhood of it I thought finding out...
I am at a loss to find out why I have no brake lights also.Have turn signals and headlight tailight action but no brake light.There are two homeless wires with a plug lurking around the firewall next...