So I have attached a picture of the opening I am referring to. In the blue circle. Is that opening supposed to cut out in the valley pan?
Type: Posts; User: amfmriv
So I have attached a picture of the opening I am referring to. In the blue circle. Is that opening supposed to cut out in the valley pan?
So on the 430 heads on the side where the valley pan sits there is an opening right in the middle on top about the size of your thumb, but no cut out opening for it on the valley pan? Is there...
It was rebuilt using the 430 rockers oiling through the head. Hollow rocker arm and solid pushrods. The lifters are new and the pushrods are new. Any recommendation on what to clean rockers with?...
any recommendations on oil to use in a recently rebuilt 430 motor? Weight?
So if i have that pressure, then when I take the valve covers off should the oil be "pouring" out all over the place?
So the deal is that after the motor was rebuilt and got put back in, everything was timed up and tweaked and it was sounding pretty good. I never really drove it too far because there's no...
So I rebuilt the motor and one of the only things that wasn't replaced was the oil pump. So even if I replace with a stock pump, Where exactly is it located? And is that something that after...
Where is the oil pump located on the 430? Can I get to the gears from where the oil filter assembly is or do I have to drop the oil pan?
Does anybody happen to know if there is a difference between the 430 valley pan and the 455 valley pan? I have a 430 and on the heads there is an opening on the top in the middle (about the width of...