Hey, Mine is a 40 56S with a 263 from a 53 Special.Bought in Chicago from original owner's family.Otherwise the same as when it was first built except for the paint.
Type: Posts; User: waycoolgreen
Hey, Mine is a 40 56S with a 263 from a 53 Special.Bought in Chicago from original owner's family.Otherwise the same as when it was first built except for the paint.
Hey gang,
I have an opportunity to buy a rebuilt 263 that was from an automatic car.Will it work with a standard?I understand the crank is different.Is there a way to make it work?
thanks,Ray
Hi, You are going through exactly what I did during the summer.After blowing the original 248 ,I also replaced it with a 53 -263 engine.Finding it to overheat after 30 minutes and following a lot of...
Hey guys, I didn't see any valve on the 263 that could close and cause flow problems.I'm pretty sure the head gasket's sealed well enough.I'm going to try that stocking trick as soon as I can...
Wow, thanks for the help.I eventually sent the head out and it wasn't cracked but did have a couple of sticky valves.After installing it with a new steel head gasket(supplied in the FelPro kit) and...
Not sure about the dynaflo,but I just put a 263 in my 40 with a 3 speed no problem.
Ray
Hey gang,
I had to replace the head gasket on my 53 263 St8.The Felpro kit came with a steel gasket.Can someone tell me the way to adjust the valves? My manual is not very helpful or I'm...
Hello fellow members,
My 40 Super has a 263 motor from a 53 Special in it.I have been unable to correct an overheating problem and have narrowed it down to a possible crack between the...
Thanks, I'm gonna try to get a fan first,as that would be a lot easier.
Ray (fingers crossed)
Thanks Charlie,
Where or how do i find the 450 Posting ?
thanks,Ray
Here's the woe is me.A month or so ago I asked about whether a 322 would fit in my 40 Super.Luckily I was advised no,but I did get a 263.5 from a 53 Special.My old engine got so angry it overheated...
Okay,my 40 super that seized up.I poured oil in the cylinders and got it to run.Seems to have power but the smoke from St.Helen's has nothing on this.Going to do compression test once my son returns...
Thanks Guys, I'll try a compression test tomorrow and get back to you with my fingers crossed.
thanks,Ray
Well it was the thirteenth.Anyway driving home from a car show in Cobourg my 40 Super threw a belt and my 68 year old temp guage was sleeping.The car's engine locked up and I towed it home.Today,I...
Thanks for the advice.Well, I got it out and it's in my driveway.How do you remove the torque tube shaft from the diff spline?Is it pressed on?The banjo housing is quite different so I thought I...
Thanks,Now I have to get it out fast.
Ray
Hey Guys, I have a 53 Buick Special rear diff available from a car going to the scrappers .It has a st8 3speed standard.Here,s the big question.What ratio would it be? And would it go into my 40...
40 Buick Super 56S ,All original ,including interior.Well kept by the Original family that bought it new in Chicago until I bought it.Technically the second owner.I drive it to car shows and cruises...
Hey,Was there an automatic transmission put behind the smaller straight 8"s ?
thanks
Thanks Charley
Hey Everyone,
Me again.Regarding that 50 Roadmaster with he 320 automatic.Will the Automatic transmission hook up to my 248 engine in my 40 Super ?
thanks,Ray
Thanks,guys.
Oh well it was a thought.
Hello everybody,
I have an opportunity to get a 50 Buick Roadmaster 320 cu.in motor with automatic fairly cheap.Can anyone tell me will it fit in my 1940 Buick Super ? I have a 248 standard...