Search:

Hi:
I'm in the San Bernardino, CA area. What kind of price are you lookin to get for the entire package. Also is the motor a 1956 vintage.

Buick Enthusiast and Nailheader Steve Dole who has a source that manufactures Upgraded "Front Sway-Bars for '54-'56 Models

The Bars are quite substantial 1 1/8 inch thick, and bolt right on. No...

I used a set of adapters to put 17" Boyd wheels on my wagon. Just make sure to recheck all the lugs after 100 miles or so.

No experience with a Century, but lots with a special wagon.

I used a 1990 Mustang 8.8 rear end in my Buick Wagon. It was the right width. Used wheel adapters to keep th 5x5 bolt pattern.

Just put some new wheels and tires on my 56. I updated the transmission to a 700r4 with an adapter from Bendtsens, and a Ford 8.8 Rearend from a Mustang, also added Power Disc Brakes. What do you...

Does anyone know how to do this conversion and still maintain gas pedal starter function. I need to know how to wire it so it will still work. The alternator I have is a three wire external regulator...

I used a later Mustang 8.8 rear with 3.55 gears in my Buick Wagon and the width was perfect.

The link below will take you to the pictures of my installation. If you have questions please PM me. Thanks Jack

Click on the link below to access pictures of the installation.
...

I looked at trying to put a dual master and booster in the stock location with no luck. I finally removed the air box on the driver side and made a flat plate off of the air box as a pattern. I then...

Master and Booster were from a 90's Mustang. It is an 8" dual diaphram Booster. I also used a GM porportioning valve. I took the big bubble air box off and used it for a template to make a flat...

I have a 322 Nailhead that sounds like it has an exhaust leak around the intake manifold. Is that possible? Some one said that they thought Buick routed exhaust up to the manifold for heating the...

Attached are two pictures. The first one shows the 700r4 Trans and Bendtsens adapter installed in my 56 Buick. No clearance problems at all. As can be seen just a simple Transmission mount bracket...

I am in the process of converting my 56 Special Wagon with the kit from Disc Brakes Mike, It has gone smoothly so far. Attached is a pic. I am also installing a 700r Transmission using Bendtsens...

I heard this will only work on 56 and up cars something about the axles on 56 and up are compatiible while the 55's use C clips for retainers. Do a search for member TELRIV, Tom is very knowleable...

You can get new springs from Eaton Springs, they will make new ones to youe specs. Just google Eaton springs. I used them for my 56 Buick Wagon. Also, I think Fatman Fabrications makes dropped...

Let me know how the uprights work and what model number you ended up with. I have a 56 Wagon with new shorter Eaton springs, but would like to go a bit lower. Thanks Jack

Does anyone know of a good replacement steering box for my 56 Buick Special. Can a 605 box be adapted? any suggestions appreciated. Thanks

I bought one for my 56 Buick Wagon from ebay for $24.00, I see them there often. Just do a search.

I to would like information on the company please PM me. Thanks Jack